BV25P

PLATE SIZE 770X660 MM 31x25 inch

BV25P - FRONTAL VIEW

Description and standard features

The smallest version of BV series.
For assembly, adjustment, checking and repair of dies (for thermoplastics, die-casting, thermosetting, rubber and blanking) with the possibility of low pressure injection into the moulds.

Very stable structure with sturdy base made of welded and normalized steel and cast iron base plate.

Parallelism is completely managed hydraulically by means of a special flow rate cylinder, whereby the system distributes equal oil quantities to the two ascent and descent cylinders.

Construction

Very stable structure with sturdy base made of welded and normalized steel and cast iron base plate.

Upper Plate

The hydraulically actuated upper plate slides vertically on four guide columns and can rotate by 360° by reduction gears, to bring the upper die half in a comfortable position for working on it. Clamping of the upper plate in the exact horizontal position is ensured by four hydraulically actuated locating pins.

BV25P - LAYOUT

BV25P - CONTROL PANEL

Video

Accessories

Energy accumulator (single shot)
For the development of moulds for plastics, rubber and die-casting. It is a hydraulic device which is fixed to the upper plate of the press. It gives an instant blow to the closed mould to optimally check the coupling between the two half-moulds (punch and die).
The dynamic action of the device is independent of the closing movement of the press. As a result, the dynamic effect of the energy accumulator is added to the closing force of the press. Increases the efficiency of the Prussian blue marking.

Accumulatore di energia (a colpo istantaneo)

Special Wax Automatic Injection Unit
This attachment provides a way to inject special wax at a low pressure into the mould cavity. This makes it possible to check, on the basis of the moulded parts obtained, the dimensions and thicknesses of the degree of tightness of the mould, and any burrs and flashes. The wax injection attachment includes: wax container with thermostat-controlled electric heating, pneumatic drive with air pressure control, and a temperature control for the chamber to attain constant wax fluidity. Dynamic verification of the extractor elements.

Accumulatore di energia (a colpo istantaneo)    Unità automatica d’iniezione di cere speciali

Hydraulic Ejector Unit
Drives the movement of the extraction pins of moulds for plastics and die-casting. Dynamic verification of the elements.

Unità espulsore idraulico

Auxiliary Cylinders Control Unit
This hydraulic device allows movement of cylinders applied on the die or mould for greater control of mobile parts (max 2+2).

Unità di comando cilindri ausiliari

X

Request Pdf

I read and agree to the disclosure in accordance with Legislative Decree no. 196/2003
verification code

Reg. Imp. Milano 08060920157 REA 1200630 - P. Iva 08060920157 | Millutensil S.r.l ©2016 | CREDITS