Energy accumulator (single shot)
For the development of moulds for plastics, rubber and die-casting. It is a hydraulic device which is fixed to the upper plate of the press. It gives an instant blow to the closed mould to optimally check the coupling between the two half-moulds (punch and die). The dynamic action of the device is independent of the closing movement of the press. As a result, the dynamic effect of the energy accumulator is added to the closing force of the press. Increases the efficiency of the Prussian blue marking.
Special Wax Automatic Injection Unit
This attachment provides a way to inject special wax at a low pressure into the mould cavity.
This makes it possible to check, on the basis of the moulded parts obtained, the dimensions and thicknesses of the degree of tightness of the mould, and any burrs and flashes. The wax injection attachment includes: wax container with thermostat-controlled electric heating, pneumatic drive with air pressure control, and a temperature control for the chamber to attain constant wax fluidity. Dynamic verification of the extractor elements.
Hydraulic Ejector Unit
Drives the movement of the extraction pins of moulds for plastics and die-casting. Dynamic verification of the elements.
Auxiliary Cylinders Control Unit
This hydraulic device allows movement of cylinders applied on the die or mould for greater control of mobile parts (max 2+2).