Roller, felt covered or brush and spray lubrication systems

ROLLER LUBRICATION SYSTEMS, SPRAY LUBRICATION SYSTEMS, DISPENSER SOLUTIONS

LUBRICATION SYSTEMS

Millutensil produces roller, felt-covered (or brush), and spray lubrication systems.

Millutensil also produces dispenser systems, along with pressure and electronic feed systems.

Felt covered rollers lubrication LRF 32 / 60 / 110

The oil is fed to the felt rollers from the inside-out, through the cavities.

The upper roller regulation on the material occurs by means of tension springs.

SPECIFICATION

	LRF 32	LRF 60	LRF110
Oil viscosity at 40° C	up to 100 mm2/s	up to 150 mm2/s	up to 200 mm2/s
Feeding length approx.	100 mm	180 mm	200 mm
Stroke number	automatic speed presses	up to 150 per min.	up to 100 per min
Thickness of material	up to 1 mm	from 0,5 to 1,5 mm	from 1 to 5 mm
Sheet width	from 20 to 250 mm	from 80 to 800 mm	from 150 to 1.000 mm

APPLICATION

Suitable for blanking and bending operations
In a limited way for drawing operations

Lubricators with brushes brushing rollers LRS 60

The oil is fed to the brush rollers from the inside-out, through the holes.
The upper roller regulation on the material occurs by means of tension springs.

SPECIFICATION

	LRS 60
Oil viscosity at 40° C	from 80 up to 250 mm2/s
Feeding length approx.	180 mm
Stroke number	up to 120 per mm
Thickness of material	from 1 to 2 mm
Sheet width	from 80 to 430 mm

APPLICATION

Suitable for blanking, bending and drawing

Lubricators with felt motorized rollers LRFM 110

The oil is fed to the felt rollers from the inside-out, through the cavities. The upper roller regulation on the material occur by means of a pneumatic cylinder.
A gear-motor drives the upper roller at fixed speed.
On request, the upper roller can be supplied with an inverter variable speed drive.

SPECIFICATION

	LRFM 110
Oil viscosity at 40° C	up to 240 mm2/s
Feeding length approx.	Unlimited feeding length
Stroke number	up to 100 per mm
Thickness of material	max 10 mm
Stroke of upper roller	15 mm
Sheet width	from 150 to 1.000 mm

APPLICATION

Suitable for blanking, bending and drawing

Lubricators with felt rollers LRFP 110

The oil is fed to the felt rollers from the inside-out, through the cavities. The upper roller regulation on the material occurs by means of a pneumatic cylinder.

SPECIFICATION

	LRFP 110
Oil viscosity at 40° C	up to 200 mm2/s
Feeding length approx.	Unlimited feeding length
Stroke number	up to 100 per mm
Thickness of material	from 1 to 8 mm
Stoke of upper roller	15 mm
Sheet width	from 1.100 to 1.600 mm

APPLICATION

Suitable for blanking, bending and drawing

Lubricators with felt rollers for lateral lubrication LRFC 60

The oil is fed to the felt rollers from the inside-out, through the cavities. The upper roller regulation on the material occurs by means of pneumatic cylinder. The lubricators are usually positioned on the left and right side of the sheet to be lubricated.

SPECIFICATION

	LRFC 60
Oil viscosity at 40° C	up to 150 mm2/s
Feeding length approx.	600 mm
Stroke number	up to 150 per mm
Thickness of material	1 to 4 mm
Stroke of upper roller	15 mm
Sheet width	from 100 to 200 mm

APPLICATION

Suitable for blanking, bending and drawing, forming machines

Roller lubricators with quick felt change LRFA 60

The oil is fed to the felt rollers fromthe inside-out, through the cavities.The upper roller regulation on the material occurs by means of tension springs. Felt-covered rollers can be quickly replaced using the release lever.

SPECIFICATION

	LRFA 60
Oil viscosity at 40° C	up to 150 mm2/s
Feeding length approx.	600 mm
Stroke number	up to 150 per mm
Thickness of material	1 to 4 mm
Stroke of upper roller	max 10 mm
Sheet width	from 100 to 1.000 mm

APPLICATION

Suitable for blanking, bending and drawing

Roller lubricators with quick felt change LRFAP 60

The oil is fed to the felt rollers fromthe inside-out, through the cavities.The upper roller regulation on the material occurs by means of pneumatic cylinder. Felt-covered rollers can be quickly replaced using the release lever.

SPECIFICATION

	LRAPF 60
Oil viscosity at 40° C	up to 150 mm2/s
Feeding length approx.	600 mm
Stroke number	up to 150 per mm
Thickness of material	1 to 4 mm
Stroke of upper roller	10 mm
Sheet width	from 200 to 1000 mm

APPLICATION

Suitable for blanking, bending and drawing

Three-section lubricators with felt rollers LRF 110-3S

The oil is fed to the felt rollers fromthe inside-out, through the cavities.The upper roller regulation on the material occurs by means of pneumatic cylinder.

SPECIFICATION

	LRF 110-3S
Oil viscosity at 40° C	up to 200 mm2/s
Feeding length approx.	Unlimited feeding length
Stroke number	up to 150 per mm
Thickness of material	1 to 8 mm
Stroke of upper roller	15 mm
Sheet width	from 800 to 1.800 mm

APPLICATION

Suitable for blanking, bending and drawing

Section roller lubricators LRF2P 110 – LRS2P 110

The oil is fed to the rollers from the inside-out, through the cavities.
The upper and lower rollers regulation on the material occurs by means of pneumatic cylinders.
The lubricator can be equipped with an extractable tray system for easier maintenance.

SPECIFICATION

	LRF2P 110 – LRS2P 110
Oil viscosity at 40° C	up to 200 mm2/s
Feeding length approx.	Unlimited feeding length
Stroke number	up to 100 per mm
Thickness of material	1 to 10 mm
Stroke of upper roller	20 mm
Sheet width	from 200 to 2.150 mm